beautypg.com

04 driver support – Volvo 2013 XC70 User Manual

Page 171

background image

04 Driver support

Driver Alert System*

04

*

Option/accessory, for more information, see Introduction.

169

Lane Departure Warning (LDW)–
introduction

This function is designed to help reduce the
risk of accidents in situations where the vehicle
leaves its lane and there is a risk of driving off
the road or into the opposite lane. LDW con-
sists of a camera that monitors the lane’s side
marker lines. The driver is alerted by an audible
signal if the vehicle crosses a side marker line
or the road’s center dividing line.

Operation and function

LDW can be switched on or off by pressing the
button on the center console. A light in the but-
ton illuminates when the function is on.

The trip computer display shows

Lane Depart

Warn Standby <40 mph

(

Lane Depart Warn

Standby <65 km/h

) when the function is in

standby mode.

When LDW is in standby mode, the function is
activated automatically after the camera has
monitored the road’s side marker lines and the
vehicle’s speed exceeds 40 mph (65 km/h).

Lane Depart Warn Unavailable

will be dis-

played.

If the vehicle’s speed falls below 37 mph
(60 km/h), LDW will return to standby mode

and

Driver Alert Standby <40 mph

will be

displayed.

If the camera can no longer monitor the road’s
side marker lines,

Lane Depart Warn

Unavailable

will be displayed.

If the vehicle unexpectedly crosses the lane’s
left or right side marker lines, the driver will be
alerted by an audible signal.

No warning signal will be given in the follow-
ing situations:

The turn signal is being used

The driver’s foot is on the brake pedal

1

The throttle pedal is pressed quickly

1

If the steering wheel is moved quickly

1

In sharp turns that cause the vehicle’s
body to sway

See page 162 for information on the camera’s
limitations.

WARNING

The driver will only be warned once for each
time the wheels cross a marker line. No
alarm will be given if a marker line is
between the wheels.

1

When Increased sensitivity has been selected, a warning will be issued if a side marker line is crossed in this situation.