DirecTV DSR 660 - Manual (Page 8)

Access Card
8
• YOUR ACCESS CARD IS FRAG-
ILE.
• ALWAYS INSERT CORRECTLY
AND CAREFULLY.
• DO NOT BEND.
• DO NOT REMOVE AND
RE-INSERT UNNECESSARILY.
• NEVER SUBMERGE IN LIQUID
OR APPLY CLEANING FLUIDS.
Caution
The access card provided with your system includes information about your pur-
chase authorization and other data.To watch channels, your viewing access card
needs to be inserted in the slot on the front of your DIRECTV
® Multi-Room
Receiver.
The access card needs to be inserted during system setup and generally does not
need to be removed. Each access card has a unique number. Be sure to record
this number in the space provided on the second page of this manual in the “For
Customer Use” section for future reference.
1. Hold the card with the arrow facing upwards and pointing toward the slot in
the DIRECTV Receiver front panel.
2. Gently push the card into the slot until it meets the stop. Do not use undue
force when inserting.The end will be visible outside of the slot.
3. Keep your access card permanently inserted in your DIRECTV Receiver.
If you have to reinsert the card, you should have the arrow facing forward into
the box and the gold chip facing down.
s
RESET button
Use to reset the receiver.
SX660-2312 23/12/03 18:00 Page 8