Woodhaven 5350-5360: MDF Door Templates - Manual (Page 2)

ATTACH TEMPLATE TO 5380'S
Select the template you wish to use, center
it between the Ultra Tracks and attach it to two of
the 5380 Corner Connectors using two washers
(WS002) and two 5/8" screws (5775B).
Longer templates tend to flex during use. To prevent this,
insert the hex head of the two 3/4" bolts (HB020) in the center
T-slot of the Ultra Track next to the template. Install a 3/8"
long spacer (BUSH050) and knob (5521) on the end of each
bolt, position the bolts/spacers so they provide support for the
outer edge of the template, then tighten the knobs. See fig. 2.
USING THE TEMPLATES
Follow the edge of the template with 5301
or 5302 Plate Kit to cut the cathedral or arched
profile shape in the work. See below.
©Copyright WOODHAVEN INC. 1/12/12
(800) 344-6657 or WWW.WOODHAVEN.COM
nob (5521) on the end of each
so they provide support for the
n tighten the knobs. See fig. 2.
2
Install 3/4" bolts, 3/8"
spacers and knobs next to
edge of long templates.