Woodhaven 7600-7603: Dovetail Jigs - Manual (Page 5)

9
7600TC
Toggle Clamps
Please Read Carefully!
BEFORE BEGINNING
Identify and verify that you have all the parts listed. Read
the instructions at least once, familiarizing yourself with the
parts and assembly instructions before beginning. You’ll need a
#3 Phillips screwdriver for assembly.
If there are two clamp spindles included with the toggle
clamp (6324),
remove the shorter
spindle and
replace it with the
longer one. For
quicker spindle
adjustments,
replace the top
nut on the spindle
with the nylon
thumb nut (5525).
Attach the
toggle clamps to
the clamp bases
(6324C) using
the 1/2" screws
(5770B). Insert a
bolt (HB030 or
HB040) thru the
hole in each clamp
base (starting from
the ribbed side).
Install a 1/8" spac-
er (BUSH001), a
washer (WB002) and a ratchet handle (5860) on the end of each
bolt. See fig. 1 & 2.
The two toggle clamps with the 1-1/4" bolts attach to the
clamp base (7600B1 - shown in photo) of the Dovetail Jig and
the two toggle clamps with the 1" bolts attach to the Ultra Track
(4418) of the Dovetail Jig. Insert the head on each bolt into
the T-slot of the appropriate part, position it where needed and
tighten the ratchet handle. See fig. 2.
Due to "give" in the rubber pads of the toggle clamps, part
movement may occur on the horizontal parts (drawer front or
back) clamped to the clamp base (7600B1) of the Dovetail Jig.
If the part moves, either increase the clamp pressure, or install
the anti-slip tape (5433S - cut it to length) on the top of the
clamp base along its back edge, just behind the toggle clamp
bases.
©Copyright WOODHAVEN INC. 11/8/10
(800) 344-6657 or WWW.WOODHAVEN.COM
7600TC Parts List:
Part Description Quantity
6324 Toggle Clamp . . . . . . . . . . . . . . . . . . . . . . . . . 4
6324C Clamp Base . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
5770B 1/2” screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5525 Thumb nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
HB030 1” bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
HB040 1-1/4” bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
BUSH001 1/8” spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
WB002
Washer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
5860 Ratchet handle . . . . . . . . . . . . . . . . . . . . . . . . 4
5433S Anti-slip tape . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1