English, Adv-m51 remote control unit, Adv-m51 – Denon D-M51DVS User Manual
Page 103: Main unit adv-m51
103
ENGLISH
(4) Edited recording (when the ADV-M51 and DRR-M31 are connected with a system cord)
• The tracks on the CD can be automatically divided into sides A and B for recording according to the length of the cassette tape (tape time). (For
CDs only)
• Edited recording is possible for CDs containing up to 25 tracks. For CDs with 26 tracks or more, editing is not possible.
1
2
Open the cassette holder, load the
cassette tape onto which you want to
record, then close the cassette holder.
Load the cassette tape with side A
facing up.
DRR-M31
Turn on the ADV-M51’s power.
• The system’s power turns on.
ON / STANDBY
ON
ADV-M51
Remote control unit
3
Press the FUNCTION button and switch the function to
“DVD”.
FUNCTION
FUNCTION
ADV-M51
Remote control unit
4
Open the ADV-M51’s disc holder, load the CD, then close the
disc holder.
1 6 T r
5 6 : 0 0
ADV-M51
5
Press the MENU button on the
remote control unit and set the length
of the cassette tape onto which you
are going to record.
• For example, for a 60-minute
cassette tape, press the edit button
twice. (The length of the cassette
tape is the total time for sides A and
B.)
MENU
Remote control unit
The display switches as follows each time the MENU
button is pressed.
T a p e E d i t
C - 6 0
About 4 seconds after setting the length of the cassette
tape, the numbers of the tracks to be recorded on side A
and the remaining time for side A on the cassette tape are
displayed.
(Ex.: When tracks 1 to 9 will be recorded on side A and the
remaining time for side A is 2 minutes 40 seconds)
E
0 1 - 0 9 A 0 2 : 4 0
After this, the display switches every few seconds
between the numbers of the tracks and remaining time for
side B and the numbers of the tracks and remaining time
for side A.
(Ex.: When tracks 10 to 16 will be recorded on side B and
the remaining time for side B is 1 minute 20 seconds)
E
1 0 - 1 6 B 0 1 : 2 0
If “OVER” is displayed for the remaining time, it is not
possible to record all the tracks. Change the cassette tape
length.
To set the cassette tape length to anything other than 46,
60 or 90, use the numeric keypad and +10 button on the
remote control unit while “
” is displayed to input the
time. The time can be set to up to 99 minutes. The time is
input in the same way as when searching for CD tracks
directly.
[Example:] To set the time to 54 minutes
While “
” is displayed, press
,
,
,
,
, 4.
+10
+10
+10
+10
+10
BAND
PHONES
VOLUME
ON / STANDBY
DVD SURROUND RECEIVER ADV-M51
TONE / SDB
FUNCTION
MENU / SET
+
-
SURROUND / SELECT
PUSH - PARAM.
4 6
4
1
3
ON / STANDBY
DOLBY NR
ON
OFF
CD SRS
REC
REVERSE
MODE
PLAY
CASSETTE DECK DRR-M31
2
2
+
-
+
-
A / V
A-B REPEAT
SEARCH MODE
ON
OFF
REPEAT
RANDOM
CLEAR
ZOOM
SLIDE MODE
PROG/DIRECT
MEMO
BAND
MODE
STATUS
FUNCTION
SURROUND
INPUT MODE
TEST TONE
DVD
TUNER
CH
3
-
+
2
1
6
5
4
9
8
7
0
/10
CALL
+10
SYSTEM
MD
CDR TAPE
TUNER TV / VCR
VCR
NTSC/PAL
SLEEP
ENTER
CD SRS
EDIT/MENU
CHARAC.
REC
TIME
TITLE
TUNING /
TV VOL
TV CH
TV CH
TUNER
DVD
MD/LINE-1
TAPE /LINE-2
AUTO DECODE
VIRTUAL
DIRECT
5CH STEREO
STEREO
D.AUX
IN/SURR.
IN/SURR.
DVD
T V
TV IN
SOURCE
9
8
2
1
7
6
+
-
6
1
3
Main unit ADV-M51
Cassette deck (DRR-M31)
Example: Recording a CD with 16 tracks and a total playing time of 56
minutes onto a C-60 (60-minute) cassette tape
Edited recording
canceled