Denon D-M51DVS - Manual (Page 101)

101
ENGLISH
2 Making system connections between the ADV-M51 and the D-M31 series cassette deck (DRR-M31) makes operation even easier. (For
instructions on connections, refer to “Connecting to D-M31 Series System Components” on pages 10 to 11.)
2 System functions will not work properly if the input/output function settings are not right for the connected components. Be sure to set the
input/output functions for the components being used. (See page 38.) The setting contents are maintained until they are next changed even
when the power is switched off.
(1) Auto power on function
• When the play/pause button on the main unit ( 1 / 3 ) or the DVD play button on the remote control unit ( 1 ) is pressed while the power is in
the standby mode, the ADV-M51’s power turns on automatically, and if a disc is loaded in the ADV-M51 the disc is played.
BAND
PHONES
VOLUME
ON / STANDBY
DVD SURROUND RECEIVER ADV-M51
TONE / SDB
FUNCTION
MENU / SET
+ -
SURROUND / SELECT PUSH - PARAM.
1
-
A / V
3
STATUS
SETUP TONE /SDB
FUNCTION SURROUND INPUT MODE TEST TONE
DVD
CH
0 /10 CALL
ENTER
MUTING
+10
SYSTEM MD
CDR TAPE
TUNER TV / VCR
VIRTUAL DIRECT STEREO
IN/SURR.
IN/SURR.
DVD
9 8
2 1
7 6
+
-
1
1 When the ADV-M51 is in the standby mode, the power can be
turned on simply by pressing the play/pause button on the
main unit or the DVD play button on the remote control unit.
If a disc is loaded, playback starts.
The auto power on function also turns the
power on when the disc holder is opened
while the ADV-M51 is in the standby mode.
Main unit
• To listen to a radio program, simply press
one of the tuner preset buttons (“+” or “–”)
on the remote control unit. The power turns
on and a station is tuned in.
• The power on function works in the same
way when system connections are made
with the D-M31 series cassette deck (DRR-
M31). For details, refer to the respective
component’s operating instructions.
+
-
TUNER
CH
Remote control unit
(2) Auto function selection
• At the touch of a button, the function switches automatically to
“DVD” and disc playback begins.
BAND
PHONES
VOLUME
ON / STANDBY
DVD SURROUND RECEIVER ADV-M51
TONE / SDB
FUNCTION
MENU / SET
+ -
SURROUND / SELECT PUSH - PARAM.
1
1
• To listen to a radio program, simply press
one of the tuner preset buttons (“+” or “–”)
on the remote control unit.
• Auto function selection works in the same
way when system connections are made
with the D-M31 series cassette deck (DRR-
M31). For details, refer to the respective
component’s operating instructions.
• Auto function selection does not work for components connected
using the AUX or D.AUX input/output terminals.
+
-
TUNER
CH
Remote control unit
Main unit Remote control unit
DVD
1
-
A / V
3
STATUS
SETUP TONE /SDB
FUNCTION SURROUND INPUT MODE TEST TONE
DVD
CH
0 /10 CALL
MUTING
+10
SYSTEM MD
CDR TAPE
TUNER TV / VCR
VIRTUAL DIRECT STEREO
IN/SURR.
IN/SURR.
DVD
9 8
2 1
7 6
+
-
1
Press the play/pause button on the ADV-M51 or the DVD play
button on the remote control unit while a component than the
DRR-M31 (cassette deck) is playing.
• Playback on the
other component
stops, the ADV-
M51’s function
switches to
“DVD” and if a
disc is loaded
playback of the
disc starts.
Main unit Remote control unit
DVD
1
20 SYSTEM FUNCTIONS