StorCase Technology 4-Bay Desktop SCSI Ultra320 - Manual (Page 13)

Introduction 5
InfoStation 4-Bay User's Guide - Rev. C01 StorCase Technology, Inc.
Rear Panel
(Figure 3)
• SCSI ID Select Switch(es) - Provide SCSI ID selection for each drive bay (4 total).
The InfoStation uses four (4) rotating switches (refer to section "Selecting the SCSI
ID Number" for further information).
• Fault LED -
OFF - Indicates normal temperature and fan conditions.
Red - Slow blink indicates overtemperature conditions. Audible alarm
will also sound (if enabled).
Fast blink indicates both overtemperature and fan failure con-
ditions. Audible alarm will also sound (if enabled).
Steady glow indicates fan failure. Audible alarm will also sound
(if enabled).
• Alarm Mute Switch - Mutes audible alarm.
• Alarm Mute LED -
OFF - Indicates that alarm is enabled (audible alarm will sound).
Amber - Indicates that alarm is muted (audible alarm will not sound).
• Reset Switch - Resets controller module (will not reset the SCSI bus).
• SCSI I/O Module(s) - Available with single or dual 68-pin VHDCI connectors for
single or dual-channel Ultra320 configurations.
NOTE: Daisy-chaining requires the optional SCSI I/O Repeater Module(s). Refer
to Appendix B for further information.
• Power Switch - Rocker switch controls power to the power supply.
• A/C Power In - Accepts U.S. and other available international standard power
cables.
• Blower Vent - High-pressure blower inside provides ample cooling (39.5 CFM) for
high speed drives. Self-adjusting variable-speed blower for optimal cooling
performance.
• Power Supply (Not Shown) - One (1) 250W auto-switching power supply.