StorCase Technology DE110 User Manual

Page 23

Installation

StorCase Technology, Inc.

Encrypted DE110 User's Guide - Rev. A01

Connect the I/O cable from the host adapter to the receiving frame. The Pin 1 indicator

on the cable must be properly aligned.

Connect the power cable from the DC power supply in the computer or expansion

chassis to the power connector on the DE110 receiving frame. Refer to Figure 6 for

the DE110 receiving frame power connector location.

Replace any expansion boards that may have been removed earlier. Replace the

system cover according to the manufacturers instructions.

Reconnect any system or peripheral cables removed earlier.

Turn ON power to the computer. If the installation has been successful, and all the

cables have been properly attached, the system should boot normally. Although the

computer may not recognize the DE110 yet, the front panel display on the DE110 re-

ceiving frame should illuminate.

NOTE:

Electronic security key must be inserted before powering ON the host

system (when in Encryption/Decryption mode). Security key is not re-

quired when operating in Bypass mode.

CAUTION:

DO NOT insert the electronic security key into any FireWire port! Doing

so can result in damage to the key! StorCase does not provide duplicate

keys, and assumes no responsibility for lost data resulting from da-

maged keys.

10. The new drive may need to be formatted or initialized prior to use with the operating

system and applications software. Refer to the drive and/or computer manufacturer's

documentation for formatting information.