StorCase Technology DE100i-A66 - Manual (Page 26)

Appendix C - Optional Accessories 19
DE100i-A66 User's Guide - Rev. A00 StorCase Technology Inc.
Drive Cover
The full drive cover (part number DX100-COV), is an attractive metal cover which can provide
additional protection to the drive, preventing foreign material from coming in contact with the
drive and cables. The full drive cover is similar to the cable cover provided with the DE100i-
A66, except the full drive cover protects the drive as well as the cables. It is easily installed
with two (2) #6-32 x 3/16" flat head screws as shown in the illustration above.
Slip Drive Cover
Lip into Top Rear
of Carrier. The
Sides of the Cover
Will Fit Between
the Drive and the
Carrier. Mounting
Holes Must be
Towards Rear of
Carrier. 1
Swing Drive Cover
Down, Covering
the Drive. Make
Certain You Do
Not Damage
Connector Pins or
Cables. 2
Slide Drive Cover
Forward Making Certain
Front Cover Lip is Inside
Carrier. Fasten Screws. 3
Full Drive Cover (optional)
Disk
Carrier
Drive
Cover
Mounting
Holes
1
2
3
0067
Drive Plug
0429
Figure C-3: Drive Plug
The drive plug (part number DX100-PLUG), is designed to fill system or external enclosure bays
that are occupied by receiving frames that have no carrier units installed. The purpose of the
plug is to provide an attractive and functional method of directing proper air flow to the other
installed devices in the system or external enclosure.
Figure C-2: Full Drive Cover