StorCase Technology DE100i-A66 - Manual (Page 24)

DE100i-A66 User's Guide - Rev. A00 StorCase Technology Inc.
Appendix B - Attaching the ON/OFF Key 17
Appendix B - Attaching the ON/OFF Key
The following information describes the necessary steps to attach the ON/OFF key to the key
lock mechanism so that it is non-removable, preventing accidental key loss. The procedure
can be reversed at a later date to revert back to a removable key.
1. Make certain power is OFF to the receiving
frame.
Locate the rectangular shaped key lock
mechanism access hole on the inside of the
receiving frame. Note that the pawl is in an
upright position.
Insert the key into the lock.
2. Rotate the key 90 degrees counterclockwise
so that the pawl is visible in the access hole
as shown in the figure at left.
3. Using the provided alignment tool, unscrew
and remove the pawl from the access hole.
4. Rotate the key 180 degrees clockwise (or
counterclockwise).
5. Reinstall the pawl into the access hole with
the alignment tool.
The key lock has now been reconfigured.
0156
Pawl
Access
Hole
Key/Lock
90
Degrees
180
Degrees
Figure B-1: Attaching the ON/OFF Key