Spectrum Controls 1756sc-CTR8 - Manual (Page 45)

Chapter 5: Channel Configuration, Data, and Status
35
StoredValue[x] 0-16777215 FLOAT
Displays the value of the stored stored counts register. The maximum
value is 1677215 when scaling is off. When scaling is applied the
maximum value is 1677215/K*M.
Rate[x] 0-65,000 REAL
Current rate value.
EnableEcho[x] 0,1 BOOL
Software enable for the channel. This is an echo of the output tag.
0=Enable
1=Disable
WasReset[x] 0,1 BOOL
Displays whether the channel counter was reset.
0 = Counter was not reset
1 = Counter was reset
WasPreset[x] 0,1 BOOL
Displays whether the preset value for the channel counter was loaded.
0 = Preset value was not loaded
1 = Preset value was loaded
NewStoredData 0,1 BOOL
0 = Data not stored
1 = Data Stored
NewRateData 0,1 BOOL
0 = Data is Old
1 = Data is New
GateState[x] 0,1 BOOL
Displays the channel Z state.
0 = Gate is Not Active
1 = Gate is Active
CounterInputState[x] 0,1 BOOL
This echos the state of the input. Note that this is also impacted by the
gate and/or enable line.
CountDirection[x] 0,1 BOOL
0 = Counting up
1 = Counting down
CTRLimit[x] 0,1 BOOL
This flag is latched when counts are equal to the user defined limit.
0 = Not set
1 = Set
CTRZero[x] 0,1 BOOL
0 = Not set
1 = Set