Spectrum Controls 1756sc-CTR8 - Manual (Page 44)

34
ControlLogix ™ Counter Module
Output Tags
Disable[x] 0,1 BOOL
Enable the counter for channel [x].
0=enable
1=disable
ResetCounter[x] 0,1 BOOL
Resets counter 0 and begins counting.
0 = do not reset
1 = reset
LoadPreset[x] 0.1 BOOL
Loads preset count value into counter [x] and begins counting.
0 = no action
1 = load preset
ResetFlags[x] 0,1 BOOL
Reset all flags.
0=not Reset
1=Reset
CounterInvert[x] 0,1 BOOL
Invert current direction of counter.
0=Standard
1=Inverted
ResetNewStoredFlag[x] 0,1 BOOL
Reset new stored data flag.
0=not Reset
1=Reset
ResetNewRateFlag[x] 0,1 BOOL
Reset rate data flag.
0=not Reset
1=Reset
Input Tags
The following data tags are preceeded by the tag name
CTR8_Input.ChannelData[x] where x is the channel number 0-7.
CommStatus 0,65535 DINT
Displays module connection status.
0 = module is connected
65535 = module is not connected
Count[x] 0-16777215 FLOAT
Displays the channel count value.