SkyRC Hornet 60A ESC for Air - Manual (Page 6)

6
Programmable Features
Question(Setting) Value Description & Recommended Use
1.Cutoff Voltage 1)Auto-
LiPo(D)*
HORNET ESC will beep the number of
cells it's detected immediately after
initialization tones. Automatically
detects LiPo Cell count. Cutoff voltage
is sets to 3V/cell.
2)4.0V Cutoff 5 cell NiCd/NiMH pack.
3)5.0V Cutoff 5-8 cell NiCd/NiMH pack.
4)6.0V Cutoff 5-10 cell NiCd/NiMH pack or 2 cell LiPo
pack.
5)9.0V Cutoff 5-16 cell NiCd/NiMH pack or 3 cell LiPo
Pack.
6)12.0V Cutoff Up to 16 cell NiMH/NiCd pack or 4 cell
LiPo Pack.
2. Current
Limiting
1)Very
Sensitive
Shut down ESC immediately when over
current is detected.
2)Sensitive
Shut down ESC quickly when over
current is detected.
3)Normal(D)*
Recommended for all application
except helicopters.
4)Insensitive
5)Disable
Disable current limiting, use at your
own risk.
3. Brake Type 1)Soft Slow
Brake
General aircraft use with fixed
properller.
2)Hard Slow
Brake
Application where more braking power
is required.
3)Soft Brake
(D)*
Compectition use where a very short
soft brake delay is required
4)Hard Brake Compectition use where a very short
hard brake delay is required
For helicopters applications.
5)Brake
Disabled
Helicopters, 3D airplanes or aerobatic
airplanes