SkyRC Hornet 60A ESC for Air - Manual (Page 10)

PRODUCT WARRANTY
10
CE APPROVAL
All HORNET ESCs satisfy all relevant and mandatory EC directives:
These are the EN61000-6-1:2007 Electromagnetic compatibility (EMC).
Generic standards. Immunity for residential, commercial and light-industrial
environments.
EN61006-6-3:2007 Electromagnetic compatibility (EMC). Generic standards.
Emission standard. For residential, commercial and light-industrial
environments.
The approval procedure includes a test of interference radiation, i.e. of
interference generated by the speed controller. This speed controller has
been tested under practical conditions at maximum load current and with a
large number of cells, and remains within the interference limits.
The procedure also includes also a test of interference susceptibility, i.e. the
extent to which the device is vulnerable to interference from other devices.
The test involves subjecting the speed controller to RF signals similar to
those produced by an RC transmitter.
The HORNET Brushless ESC is guaranteed to be free from defects in materials
or workmanship for a period of ONE YEAR from the original date of purchase
(verified by dated, itemized sales receipt). Warranty does not cover incorrect
installation, components worn by use, damage to case or exposed circuit
boards, damage due to timing, damage from using more than 6 Li-Po cells
input voltage, cross-connection of battery/motor power wires, overheating
solder tabs, reverse voltage application, improper use or installation of
external BEC, damage resulting from thermal overload or short-circuiting
motor, damage from incorrect installation of FET servo or receiver battery
pack, tampering with internal electronics, allowing water, moisture, or any
other foreign material to enter ESC or get onto the PC board, incorrect
installation/wiring of input plug plastic, allowing exposed wiring or solder
tabs to short-circuit, or any damage caused by a crash, flooding or natural
disaster. Because SKYRC has no control over the connection & use of the
speed control or other related electronics, no liability may be assumed nor
will be accepted for any damage resulting from the use of this product. Every
SKYRC speed control & motor is thoroughly tested & cycled before leaving
our facility and is, therefore, considered operational. By the act of connecting/
operating speed control, user accepts all resulting liability. In no case shall
our liability exceedthe product's original cost. We reserve the right to modify
warranty provisions without notice.