Rocktron Chameleon On-Line User Manual

Page 88

Turn the PRESET control on the transmitting Chameleon to the preset that is to be dumped into the
receiving Chameleon. As the PRESET control is turned, the preset number will be displayed in the
first three characters of the display.

Use the PRESET control on the receiving Chameleon to select the preset location to store the
received preset. The preset currently stored at the selected location will be lost when the new preset
is received, therefore caution should be used when selecting a preset location.

After all the information for the dumped preset is stored, the receiving Chameleon will display
"LOADED". The receiving Chameleon also recalls the loaded preset at this time so that it may be
verified.

Step 4

Step 5

To initiate the dump, press the STORE button on the transmitting Chameleon. The transmitting
Chameleon will display the preset number being dumped and "DUMPED". The receiving Chameleon
will display the preset location being stored to and "RECEIVING..." while it receives and stores the
preset parameters and title.

Note:

If there is an error in transmission, the unit will display "RECEIVE ERROR ". Should this occur, check
connections and try again. If other errors occur, check the Error Messages chart in the Appendix.

Step 6

32 PR DUMP/LOAD

122 PR DUMP/LOAD

122 RECEIVEING...

32 DUMPED

32 LOADED