Rocktron Chameleon On-Line - Manual (Page 74)

71
Selecting a configuration:
Step 1
Step 2 Turn the PARAMETER SELECT control clockwise to display the current configuration.
Step 3 Use the PARAMETER ADJUST control to select the desired configuration. (The STORE LED will light
when the parameter is altered)
Press the STORE button to initiate the store procedure. The Chameleon display will alternate between
the current preset number/title and "STORE AT PRESET". Step 4
To select a new configuration, turn the FUNCTION SELECT control clockwise until the Chameleon
displays "CONFIG SELECT".
1 2 4,6 5 3
CONFIG SELECT
H-GAIN,CRS,DLY,REV
WAH,L-GAIN,DLY,REV
29 PRESET TITLE
Ö
STORE AT PRESET
Note: The new configuration will not take effect until it is stored.