Rocktron Chameleon On-Line - Manual (Page 71)

68
Turn the FUNCTION SELECT control to select the function heading which contains the parameter(s) you
wish to change.
Turn the PARAMETER ADJUST control to alter the parameter value. The LED above the STORE button
will light, indicating that the preset has had a parameter altered from its stored value. Step 3
The COMPARE button may now be pressed to compare the sound of the stored parameter value to the
sound of the altered parameter value.
Turn the PARAMETER SELECT control to the specific parameter you wish to change.
Changing preset parameters:
Step 1
Step 2
4 3
**** REVERB ****
REV DECAY 59
REV DECAY 32
REV DECAY 59
Step 4
1 2