Rocktron Chameleon On-Line - Manual (Page 84)

81
Turn the PARAMETER SELECT control one step clockwise to display the current Program Changes
mapping assignments. Step 5
* The preset number to map to can also be set to "OFF"—thereby not responding to
that program change command.
Step 7 The number on the right of the display is the preset number to map to (or the preset number that will
be recalled when the MIDI program number on the left is received). Turn the PARAMETER adjust
CONTROL to select the preset number to map to.
MAP 58 TO 58
Chameleon Preset Number
Step 6 The number on the left of the display is the MIDI program number (or the number sent via a MIDI
footswitch or other MIDI transmitter). Turn the PARAMETER SELECT control to select the MIDI
program number to map to a preset.
MAP 58 TO 58
MIDI Program Number
MAP XXX TO XXX
Step 8 After selecting both the MIDI program number and the preset number, press the STORE button to
save the change for each altered mapping. "STORED" will flash briefly on the display.
STORED