Rocktron Chameleon On-Line - Manual (Page 75)

72
Turn the PRESET control to select the preset you wish to store the new configuration into. (If you want to
store the selected configuration into the current preset, skip this step.)
Press the STORE button a second time to store the selected configuration into the selected preset. The
Chameleon will display "STORED" briefly.
When a new configuration is stored into a preset, each of the parameters contained in the new configuration that were
contained in the previous configuration will retain the same values. All new configuration parameters that were not
contained in the old configuration will be set to their default value (or their lowest value).
Step 5
Step 6
86 PRESET TITLE
Ö
STORE AT PRESET
STORED