Parr Instrument 6725 - Manual (Page 59)

6725
Semi-micro Calorimeter Instruction Manual
8-1
MEMORY MANAGEMENT
The 6772 Calorimetric Thermometer will
hold data for 1000 tests in its memory.
These tests may be pre weights,
preliminary or final reports for either
calibration or determination runs. Once
the memory of the controller is filled, the
controller will not start a new analysis
until the user clears some of the
memory.
The FILE MANAGEMENT key on the
main menu leads to the file
management sub-menu. The RUN
DATA FILE MANAGER key leads to a
listing of the files. Single files can be deleted by highlighting the file and pressing the
DELETE key. The controller will then ask the user to confirm that this file is to be
deleted. A series of files can be deleted by selecting the first file in the series and then
the last file in the series using the EXTEND SEL key and then pressing the DELETE
key.
The controller of the 6772 Calorimetric Thermometer can accept SD memory cards.
These cards can be used to:
• Copy test file data for transfer to a computer
• Copy user settings for back up
• Reload user settings to the controller to restore or update the controller’s
operating system
• Copy the data log file for transfer to a computer.
SD memory cards are inserted into the slot on the back of the control section of the
Calorimetric Thermometer. Keys are provided on the FILE MANAGEMENT sub-menu to
initiate some of these functions. The data log is transferred from the User Defined
Functions Menu on the Diagnostic Menu.