Parr Instrument 6725 - Manual (Page 33)

6725
Semi-micro Calorimeter Instruction Manual
5-6
Settings Protect:
Provides protection for the program options and settings on the menus. If this is turned
ON, the user will be warned that enumeration keys are locked when a key is pressed.
Enumeration Keys either toggle a value (ON/OFF) or select from a predefined list. This
feature is used primarily to protect the instrument settings from accidental changes if one
were to inadvertently touch or bump up against the touch screen.
User/Factory Settings:
This key leads to a sub-menu that
allows the user to save or recall
user defined instrument settings.
Additionally, factory pre installed
settings supporting different bombs
or special operating modes can also
be recalled.
Reload Factory Default Settings:
Used to erase all of the settings and
restore the factory default settings.
Reload User Default Settings:
Used to restore the last saved user’s setup should the program in the instrument be
corrupted for any reason.
Save User Default Settings:
Used to record the setup to the memory once the user has configured the instrument to
their operating requirements.
Note:
Keys which make global changes to the setup of the calorimeter
contain a YES or NO response to make certain that the user
wishes to proceed. This two step entry is intended to prevent
inadvertent global program changes.
Compare Settings With Factory Defaults:
This button will bring up a screen that will show the differences in the current settings of
the calorimeter with the factory defaults.
Feature Key:
Unique Feature Keys obtained from Parr allow the user to access capabilities on the
instrument such as bar code interfacing or remote operation of the calorimeter.
Bomb Type Select:
Not currently configured for the 6772 changes for different bomb types are loaded by
changing the User Setup ID and Reload User Default Settings.