Martin Christ Gamma 2-16 LSCplus - Manual (Page 85)

Gamma 1-16 LSC&
Gamma 2-16 LSC&
8 Maintenance and service
Version 04/2013, Rev. 1.1 of 16/12/2013 • sb
85
Translation of the original operating manual
Pos: 210 /20 0 Ch rist/3 60 G T-BA L abo r-Pilot (STANDARDMODU LE)/0 80 Wa rtun g u nd In stan dhalt ung/ 080 -00 30 Inst and haltu ngsa rbeit en Labo r-RVC @ 6\ mod_ 129 913 772 984 0_6 8.docx @ 3 529 7 @ 2 @ 1
8.3 Service
DANGER
In the event of service work that requires the removal of the panels, there
is a risk of electric shock or mechanical injury. Only qualified specialist
personnel is authorised to perform this service work.
The freeze-dryer is subject to high mechanical stress. In order to be able to
withstand this high level of stress, high-quality components were used
during the production of the freeze-dryer. Nevertheless, wear cannot be
excluded and it may not be visible from the outside.
This is why we recommend having the freeze-dryer checked by the
manufacturer during an inspection once per year.
Information and appointments:
From Germany
• Use the service request form at
www.martinchrist.de [Service Area]
or contact
• Martin Christ Gefriertrocknungsanlagen GmbH
An der Unteren Söse 50
37520 Osterode (Germany)
Tel. +49 (0) 55 22 / 50 07-44 44
E-mail: [email protected]
Outside Germany:
• Contact our agency in your country. All agencies are listed at
www.martinchrist.de [Contacts] [Foreign agencies]
NOTE
• If you would like to utilise our after-sales-service, please state the type
of your freeze-dryer and its serial number .
• Please use our service request on the Internet (see above).
Pos: 211 /01 0 Univ ersal mod ule/ Sei tenwe chsel @ 0\ mod _12 021 1624 431 2_0 .docx @ 1 05 @ @ 1