Lumagen VisionProHDP - Manual (Page 16)

VisionPro HDP
™ User Manual and Installer Guide
© 2004-2006 Lumagen®, Inc. 13 Rev 1.1
the green color (COLGRN) and Hue (HUEGRN) offsets using the green colorbar
pattern and the green filter.
MENU → IN → CONFIG → COLR → COLR →
(
COLR
,
HUE
,
COLRED
,
HUERED
,
COLGRN
,
HUEGRN) →
[ … , † , ˆ , ‡ ]
OK
•
Select Advanced AVIA
→
Video Test Patterns
→
Special Tests
→
Y/C-Delay.
•
Set Y/C Delay. Use the Lumagen Control to minimize the error in the blue and red
timing verses Luma. On the right part of the screen there are red bars on a yellow
background. Adjust to balance any color transition errors on the left and right edges of
the red bars. The C
B
and C
R
channels are calibrated independently.
MENU → IN → CONFIG → ADJ → YC-DLY →
( CBCR , CB , CR) →
[ … , † , ˆ , ‡ ] OK
•
Copy the DVD configuration to all configuration memories ( MENU → IN → COPY →
OK ).
•
If desired, change to MEMB and calibrate for a different amount of room light. Then
switch back to MEMA, and again copy the DVD configuration to all configuration
memories.
•
Calibrate the other inputs.
•
Name the inputs, if desired ( MENU → CONFIG → IN → NAME → OK and follow
directions).
•
Set power-on message, if desired ( MENU → MISC → POWR → MSG →
[ … , † , ˆ , ‡ ]
OK )
•
Lock the configuration, if desired ( MENU → MISC → LOCK → LOCKED OK )
•
SAVE THE CONFIGURATION ( MENU → SAVE → SAVE OK )