Lingenfelter L220160000 L220280000 Lingenfelter Magnuson Rear Jackshaft Bracket Kit v1.1 - Manual (Page 6)

Page
10. Gently pulling towards the rear of the
supercharger, remove the supercharger jackshaft
assembly from the forward jackshaft housing.
11. Using an arbor press or equivalent,
press the jackshaft out of the pulley hub and
bearing. Inspect the individual components
after their separation is complete to confirm that
no components have been damaged. If any
component was damaged during the pressing
process, it will need to be replaced.
12. Wipe off the surface on the end of the
jackshaft where the bearing will make contact
to ensure that there are no particulates on the
contact surface.
5.
9. Remove the rear supercharger belt and
pulleys.