Lingenfelter L220160000 L220280000 Lingenfelter Magnuson Rear Jackshaft Bracket Kit v1.1 - Manual (Page 4)

Page 3.
2. Using a 1” wrench and 1” socket, break
the bolts loose that hold the jackshaft in place.
3. Using a 10mm socket, break the rear
pulley bolts loose. There are four (4) pulley bolts
on each rear pulley, as shown in the illustration
by the red arrows.
4. Using a 10mm socket, remove the front
supercharger pulley.
1. Open the hood of the vehicle. If you have
been driving the vehicle, allow the vehicle to
cool down for a few hours before starting this
installation.