Lingenfelter L220160000 L220280000 Lingenfelter Magnuson Rear Jackshaft Bracket Kit v1.1 - Manual (Page 2)

Page 1.
Parts List
LPE Magnuson rear jackshaft bracket kit
# Description Part number
1 Rear TVS SC bracket, black anodized XX09737-0070
or Rear TVS SC bracket, polished XX09737-0071
1 Retainer clip MAG69-00-01-009
1 Rear bearing MAG55-00-62-204
2 M10 x 1.5 x 20 flat head countersunk bolts KP82415
1 M10 x 1.5 x 65 bolt (for ribbed belt idler) 11516109
1 M10x1.5x70 bolt (for cogged belt idler) 11516356
1 Tensioner pulley cap XX09737-0078
1 Tensioner pulley base XX09737-0077
1 Tensioner pulley base spacer (for cogged belt idler) XX09737-0076
1 LPE T-nut XX09737-0054
1 M8 x 1.25 x 40 SS set screw 92029A325
1 M8 x 1.25 x 60 SS set screw LINSS6x08060
1 M8 x 1.25 x 70 SS set screw MM-916A2 8X70
1 M8 x 1.25 SS jam nut 47385
1 M8 SS flat washer 47395
1 LPE decal L920010000
12 Instructions N/A
Tools & Materials Required
• Arbor press or equivalent
• Blue loctite
• 1” wrench
• 11/16” wrench
• Socket wrench
• 1” socket
• 10mm socket
• 15mm socket
• 4mm Allen socket
• 6mm Allen socket
• Clean shop towel
• Lubricant for pressing the bearing and pulley
hub
• Calipers
• Snap ring pliers
• Torque wrench
Additional Required Components
# Description Part number
2 30 tooth cogged pulley L220320030
1 70mm x 50mm cogged belt idler/tensioner pulley L220350070
1 600mm x 50mm x 8mm pitched cogged belt GAT600-8MGT-50
1 30 tooth cogged pulley L220320030
1 35 tooth cogged pulley L220330035
1 70mm x 50mm cogged belt idler/tensioner pulley L220350070
1 624mm x 50mm x 8mm pitched cogged belt BS-624-8M-50