Lingenfelter L220160000 L220280000 Lingenfelter Magnuson Rear Jackshaft Bracket Kit v1.1 - Manual (Page 11)

Page
29. It there is sufficient clearence under the
rear jackshaft pulley, re-install the stock fuel line
onto the fuel rail. If there is not enough room
for the stock fuel line, as is true with a 3.49” rear
jackshaft pulley, install a new fuel line that allows
clearance for the new rear pulleys or modify the
stock fuel line accordingly.
30. Using a 10mm socket the eight (8) bolts
that were removed in step 7, we will now install
the new 14-rib rear pulleys. Start all eight bolts,
but only tighten the passenger-side pulley.
Torque the bolts on the passenger-side pulley to
106 in-lbs.
31. Install the belt onto the rear pulleys. This
will help hold the driver-side pulley in place while
being tightened. Work the belt onto the pulleys
by running the belt back and forth over the
pulleys.
32. Using the belt to hold the pulley in place,
tighten the bolts on the driver-side pulley. Torque
the bolts to 106 in-lbs.
10.