Labconco WaterPr BT Systems 90151 Series - Manual (Page 60)

Troubleshooting
52
Sanitizing the Tank
C
Open the front cover (this may require to remove the final filter) to go
into STANDBY mode (C).
D • Remove the Vent Filter and install the clear elbow fitting from the
Sanitization Kit (D).
E • Introduce the male connector of the clear tubing firmly into the
elbow fitting (E).
F • Inject 200 ml (1 ml = 1 cc) of Hydrogen Peroxide solution (30%) into
the 6 Liter tank via the clear tubing (F).
• Rinse the air vent port with 200 ml of purified water.
Continued on next page