Labconco WaterPr BT Systems 90151 Series User Manual
Page 57

Troubleshooting
49
G
•
Close the front cover (G).
The system will now go into FILLING TANK mode.
H
•
Let the tank fill up to the 100% level (H).
I
•
Let the system stand for 1 hour for effective bacteria elimination.
•
(After 1 hour) Remove the Final Filter. Install the Barbed Fitting and
Clear Tubing (I).
J
•
Perform an EMPTY TANK (C03) to dispense all the water in the
tank (J).
Continued on next page
This manual is related to the following products: