Labconco WaterPr BT Systems 90151 Series - Manual (Page 46)

Troubleshooting
38
Installation
D • Remove the new Filter Pack cartridge from its shipping box.
• Remove the protective caps on the ports of the Filter Pack cartridge.
• Locate the O-rings on the ports. Wet them with water. It is
preferable to wet them with ultrapure water.
• Install the Filter Pack cartridge until it is fully seated into the system
ports as shown (D, E and F).
E
F • CLOSE THE FRONT COVER.
G NOTE: The Tank Outlet Valve should be left open (G).