Dynex DX-L37-10A - Manual (Page 19)

16
Changing channel settings
Selecting the signal source
To select the signal source:
1 Press MENU. The on-screen menu opens.
2 Press or to highlight Channel, then press . The Channel
menu opens.
3 Press or to select Air or Cable.
4 Press EXIT to close the menu.
Hiding channels
You can delete channels from the channel list so that your TV skips the
channels when you press CH
/CH . You can still tune to the hidden
channel by using the number buttons.
To hide a channel:
1 Press MENU. The on-screen menu opens.
2 Press or to highlight Channel, then press . The Channel
menu opens.
3 Press or to highlight Show/Hide, then press ENTER. The
channel list opens.
4 Press or to highlight the channel you want to hide (the
default is to show the channel), then press ENTER to remove the
check mark from the channel.
Note: If the list has more than one page, press or to scroll through
the pages.
5 Press EXIT to close the menu.
Setting up a favorite channel list
You can create a favorite channel list so you can quickly browse through
your favorite channels by pressing FAVORITE, then selecting a channel
from the favorite channel list.
To set up the favorite channel list:
1 Press MENU. The on-screen menu opens.
DX-L37-L42-10A_08-1837.book Page 16 Wednesday, January 21, 2009 1:17 PM