Konig Electronic USB turntable with speakers User Manual

Page 7

Slide the speed selector (33/45/78) to the proper position depending on the record to be played.
Place a record on the turntable platter (remember to use the 45RPM spindle adaptor if required when playing

a 45RPM record).

Lift the tone arm from the rest and slowly move it above the side of the record.

TONE ARM CONTROL INDICATOR will light up. The turntable will begin to rotate.
Place the tone arm to the desired position of the record.

Adjust the volume knob to the desired level.
To pause or stop playing, you need to lift and move the tone arm back to the tone arm rest stand manually.

ADAPTOR

At the end of the record, the turntable will automatically stop rotating. Lift the tone arm from the center of the

record and return it to the desired position.
To stop it manually, lift the tone arm and return it to the arm rest.
NOTE: To play a 45-rpm record which has the center clip missing, first place the 45-rpm adaptor (the record

is not included) located at top right hand of the apparatus onto the spindle.

It is strongly recommended to play records with the transparent dust cover closed. Also please do not place

anything on top of the dust cover especially when playing a record. If you hear a distorted sound please

check whether the stylus is worn out. (Please refer to “How to replace the Turntable Stylus (Needle)”)
How to replace the Turntable Stylus (Needle)

Guide Pins (inside)