Konig Electronic USB turntable with speakers - Manual (Page 4)

4
Caution:
• Switch off the power to all equipment before making connections.
• Read the instructions of each component you intend to use with this unit.
• Be sure to insert each plug securely. To prevent hum and noise, avoid bundling the signal interconnection
cables together with the AC power cord.
A USB Host Socket
Connect one end of the USB cable to the USB host socket on the unit and the other end to the USB
host socket on your computer.
B LINE OUT Socket
Connect one end of the RCA LINE OUT cable into the LINE OUT socket, and the other end into the
auxiliary input (AUX) socket on your home amplifier device, matching the colors to the proper plug
and socket.
C AC Power Cord
Plug this power cord into an AC wall socket.
D FM ANTENNA
Extend and relocate the antenna when listening to a radio in FM mode.
PARTS OF THE TURNTABLE
A TURNTABLE
B 45 RPM ADAPTOR
Use the adaptor when playing a 45-rpm record.
C TONEARM CONTROL INDICATOR
The indicator lights are switched on when the tone arm is activated.
D DECORATION (NOT FOR TONEARM ADJUSMENT)
E TONE ARM
F TONE ARM REST
Place the tone arm back to the tone arm rest when playback stops.
G SPEED SELECTOR
Select a proper speed for your record before playing.
H STYLUS
I NEEDLE COVER