Kipp&Zonen METEON Data Logger - Manual (Page 5)

4
Software
Use of the software requires a PC with Windows 2000 or XP operating system and a USB
interface. The software has built-in functionality for:
- programming the sensor sensitivity
- data logging functions
For each of these functions, an interface cable is required. This cable is used to connect a
METEON to the USB bus on a PC. If your METEON comes bundled with a sensor, the
sensitivity is already programmed into the METEON, In that case, the optional interface cable
and the software give you access to the data logging functions only.
Main window
After installation, the software can be started from the Start menu. The main window allows
you to:
- Open a previously stored file with logged data.
- About .. shows the software version and link to the Kipp & Zonen website
- Exit shuts down the METEON software
The bottom line of the main window shows help (if available) on the items where the mouse
points to.