Kipp&Zonen METEON Data Logger - Manual (Page 12)

11
DISPLAY
The METEON display can show 4 digits and a minus sign. All other characters in the display
are indicated below
▲
data from PC to METEON through USB
▼ data from METEON to PC through USB
BAT indicates battery low, replace with 2 AA Alkaline types
m writing data in METEON memory
l logging started (0.5 s interval)
waiting for initial delay to pass (1 s interval)
The actual reading (613) is in
W/m
2
or
µmol/m
2
s
depending on the connected sensor.
On the back side of the METEON this unit is displayed together with the related sensor and
corresponding serial number.