Kipp&Zonen METEON Data Logger - Manual (Page 3)

2
Introduction
The Kipp & Zonen METEON is a high-performance sensor readout unit with integrated data
logger.
The sensor sensitivity is programmed into the METEON such that the readout will show
calibrated engineering units, rather than millvolts or microvolts.
Use of the data logger functions and programming the sensor sensitivity is done with the USB
interface which is standard supplied to connect the METEON to a PC.
Specifications
A/D conversion 16 bits
Input range (programmable) Full scale voltage Internal counts Internal resolution
+/- 200 mV 20,000 10µV
+/- 100 mV 10,000 10µV
+/- 50 mV 5,000 10µV
+/- 25 mV 25,000 1µV
+/- 12.5 mV 12,500 1µV
+/- 6.25 mV 6,250 1µV
Basic accuracy after factory calibration 0.1%
Temperature sensitivity < 0.5% over the full temperature range
Offset drift < 3 µV over the full temperature range
Operation temperature range -10 .. +40 °C
Storage temperature range -20 .. +60 °C
Relative humidity < 95% RH non-condensing
Input circuit > 2 M Ω // 680 nF
Input low-pass filter 5 Hz
Input connectors 2 x 4mm banana plug
Display LCD 4 digits with sign
Decimal dot position (programmable) 8888 or 888.8 or 88.88 or 8.888
Display update At least 1 per second
Computer interface USB 1.1 / 2.0 low speed
Supply current < 2 mA
Batteries 2 AA (penlight) alkaline
Battery life (alkaline) > 1200 hours (50 days) continuous use
Data logger memory 3518 samples
Data logger storage interval 2 .. 65535 seconds
Logged information Min, max and average over log interval
Software compatibility Windows 2000, Windows XP