Kipp&Zonen SOLYS 2 Sun Tracker - Manual (Page 7)

2 SPECIFICATIONS OF THE SOLYS 2
SOLYS 2 Comments
Performance
Pointing accuracy < 0.1 º Meets BSRN requires requirements
Torque 20 Nm
Payload 20 kg Balanced
Angular velocity 5 º/s
Angular acceleration 3.6 º/s²
Rotation
110 º zenith
540 º azimuth
Protection against over
rotation and damage
Physical limit stops
Operating Conditions and Dimensions
Supply voltage
18 to 30 VDC
(nominal 24 DC)
Allows for battery charging or under load
90 to 264 VAC,
50 / 60 Hz
For world-wide use
Power consumption
during Sun Cycle
20 W maximum DC Power
120 W maximum AC Power with heater operating
Power consumption after
Sun Cycle
13 W maximum DC Power
113 W maximum AC Power with heater operating
Storage temperature - 40 to + 50 ºC
Operating temperature
range
- 20 to + 50 ºC DC Power
- 40 to + 50 ºC AC Power (heater standard)
Weight
23 kg For standard tracker
5 kg Tripod stand
Dimensions (WxDxH)
50 x 34 x 38 cm
(excluding tripod stand)
Includes standard pyrheliometer mounting
Bubble level accuracy < 0.1° Relative to zenith shaft
Compliance to international standards
Environmental protection IP 65 Suitable for all-weather outdoor use
CE compliance Yes
Materials
Suitable for coastal use and areas with pollution
Features
Transmission Inverted tooth belts Pre-tensioned, no adjustment needed
Connections
Plug and socket for
AC power, DC power,
Ethernet
GPS for location and time
/ date information
Standard Antenna on top of housing
Pyrheliometer mounting
One side plate and
mounting kit as standard
For Kipp & Zonen CH 1 or CHP 1
Mounting base Standard tripod Includes adjustable feet for leveling
LED Indicators for
Power, internal
temperature and status
Multi-color to indicate various modes
Customer operation
Installation Plug-and-play, no PC GPS acquires location and time / date