Kipp&Zonen SOLYS 2 Sun Tracker - Manual (Page 10)

3.1 REQUIRED TOOLS FOR SOLYS 2 MOUNTING
For installation on site the following materials are supplied with the SOLYS 2
Allen Wrench key type 6 (for M8 bolts for tripod)
Allen Wrench key type 3
Allen Wrench key type 2.5
Screws M8 x 20 plus M8 washers
Required but not supplied are:
Screwdriver for connection of power cable to the connector
Cable for power connection of the SOLYS 2
Compass to find geographical East.
3.1.1 REQUIRED TOOLS FOR SHADING BALL ASSEMBLY / SUN SENSOR
The tools required for the mounting of the shading ball assembly are supplied with this option.
Required but not supplied are:
A Ruler, to measure the position of the optional sun sensor.