HITEC Sky Scout (2GO) - Manual (Page 6)

6
Fly high with Hitec
Section Two: Charging Your Battery – for all Users (R2GO, H2GO, P2GO)
Specifications
Input : 10~18V DC
Output : 2S(8.4V) , 3S(12.6V) : 1.1A
Nominal Power: 15W
Do not open the charger
Read the instructions before using
The CG-115 is designed to safely charge batteries without any additional setup or adjustment. Read the following instructions regarding the LED
lights before use.
The current status of the charger can be checked with the red/green LEDs in the center of the product.
1. Charging →
2. Charging complete →
3. Incorrect insertion of battery →
The Hitec CG-115 charger is for 2-cell (7.4V) and 3-cell (11.1V) LiPo batteries only. Do not use the CG-115 to charge NiMH, NiCd,
or Alkaline batteries.
Hitec CG-115 Intelligent Lithium Balance Charger
Red LED is ON/ Green LED is OFF
Green LED is ON/ Red LED is OFF
Red LED is blinking
Charging information is printed on CG-115
Charger for reference
Charging 2-cell (7.4V) LiPo battery Charging 3-cell (11.1V) LiPo battery