HITEC Sky Scout (2GO) - Manual (Page 5)

5
Fly high with Hitec
The Sky Scout Ready 2 Go (R2GO) version comes complete with everything you need to go fly. The H2GO and P2GO versions both require additional
equipment and accessories that you may already have or can buy at your local RC hobby retailer.
The
Sky Scout Hitec 2GO (H2GO) version is for modelers who already own a Hitec 2.4GHz radio or have chosen to purchase one of Hitec’s other
mid to high-class radios. These radios can be purchased at your local hobby shop or online at most RC hobby retailers. The H2GO version includes a
Minima 6S 2.4GHz receiver that is compatible with Hitec 2.4GHz radios.
The
Sky Scout Plug-n-2Go (P2GO) version is for users who already fly models and/or those who own the basic equipment and accessories needed
for RC flying. To fly the P2GO version the following components are required: transmitter and receiver with four or more channels, flight battery and
charger.
Recommended Equipment needed for flight (sold separately)
Optic 5 Transmitter CG-115 LiPo
Battery Charger
HLP-3/1300S 3S 1300mAh
LiPo Battery
Minima 6S Receiver
Package Contents
Recommended Equipment (H2GO, P2GO)
Be sure to purchase a LiPo battery within the recommended 3-cell (11.1V) 1300-2200mAh capacity specifications with 15C or higher dis-
charge rating to ensure optimal flight performance with your Sky Scout. A 2-cell battery will not provide enough power for full performance
while attempting to use a battery over 3 cells will damage the ESC and motor, and can possibly cause a fire.
Link V-TAIL OFF ELEVON CH1 CH2 CH3 CH 4 REV NOR
2.4GHz 4 Channel Aircra ft Radio