HITEC S60 - Manual (Page 37)

72 73
Precautions for The Waterproof Housing
Waterproof housing is a precision component. When using waterproof
housing, adhere to the following precautions:
1. Do not randomly remove or change the O-ring, key, or lens cover.
Otherwise, the waterproof performance deteriorates.
2. Do not store the waterproof housing in a place with corrosive
gases due to strong acid or alkali. Do not put the waterproof
housing in contact with chemical or corrosive objects, such as
strong acid or alkali.
3. Do not put the waterproof housing in a place where temperatures
are high (50°C) or low (-10°C) to avoid deformation.
4. Do not expose the S60 video camera to sunshine to avoid
deterioration of its waterproof performance.
5. Before use, ensure that the O-ring is intact, the seal is clean, the
housing is fully sealed, and the buckle is tight.
6. After using the housing in salt water, wash it clean using fresh
water, dry it, and store it in a temperate place.
Tips
1. When the unit is in use for a long period of time, its surface
temperature will rise.
2. If you do not plan on using the unit for a long period of time, it is
suggested that you charge it once every 6 months to maintain
optimal battery performance.
3. Use of the digital zoom function during shooting will have a slight
impact on image quality.
4. Visual angles under different modes will be differ slightly.
5. To play a high-definition video file, it is suggested you use a PC or
other professional device.
6. If you enable the cyclic recording function over a long period or
frequently shoot/delete photos, the memory card may retain data
fragments that prevent photo storage or picture taking. Please
back-up the data to an external storage medium and perform the
formatting operation on the memory card.
7. When the camera is being used in a high-temperature
environment, the lattice screen may become black. This is a
normal phenomenon and will not affect functioning.