HITEC S60 - Manual (Page 18)

34 35
Photo Modes
Operating Procedure for Photo Shooting
1. Turn on the S60 to enter recording standby mode.
2. Aim at the subject and preview it on the display.
3. Press the "Shutter" button once to switch the working mode to
"photo modes."
4. Press the "Shutter" button again to shoot one photo.
• The system will click to indicate a completed operation and then
returns to photo shooting standby mode.
• The TFT display in photo shooting mode is shown below:
Working mode
(photo shooting)
Remaining number of
shots of memory card Battery level
Resolution for photo shooting
Parameter Settings for Photo Shooting
Perform the following steps to set the parameters for photography:
1. Press the "M" button to enter the setting menu.
2. Press "+" / "-" to select " ";
3. Press "<" / ">" to move the blue cursor to the sub-menu you want
to configure. Press "OK" to enter the sub-menu:
Icon Functions Icon Functions
Capture mode Photo resolution
Display time
4. Press "<" / ">" to select the parameters you require.
5. Press "OK" to confirm.
6. Press the "M" button again to exit the setting menu.
• Capture Mode
Select the capture mode you require and press "OK" to confirm.
Press the "M" button again to exit the setting menu.
: Single shot mode
: Fast shot mode
: Continuous Shooting Mode
: Timed shooting mode