HITEC S60 - Manual (Page 15)

28 29
Parameter Setting For Video Recording
Perform the following steps to set the parameters for video recording:
1. Press the "M" button to enter the setting menu.
2. Press "+" / "-" to select " ."
3. Press "<" / ">" to move the cursor to the sub-menu you want to
configure. Press "OK" to enter the sub-menu:
Icon Functions Icon Functions
Execution mode Video resolution
View angle Bitrate
Video content loop 180° photo rollover
Display time
4. Press "<" / ">" to select the parameters you want.
5. Press "OK" to confirm.
6. Press the "M" button again to exit the setting menu.
• Execution Mode
Select the execution mode you want. Press "OK" to confirm. Press
"M" again to exit the setting menu.
: Video recording
: Voice recording
: PIV : Video-only
: Time Lapse
: Auto video
• Video-Only Mode
In this mode, you can record a video without voice.
• Time Lapse Mode
The time Lapse function records one picture as a frame of the
video according to the time interval you set. It doesn’t require post-
editing and can easily capture continuous frame evolution and
movement.
The available options are: 1s, 2s, 5s, 10s and 30s.
(The function is unavailable in 720P 100f/120f modes.)
• Auto Video Mode
If this function is enabled, the system auto-starts recording video
according to the countdown time you set.
The available options are: 5s, 10s and 20s.