HITEC S60 - Manual (Page 29)

56 57
Method 1: Change the starting frame and ending frame by directly
dragging the time frame panel to the desired frame. (Click the Play
key for previewing until the best location is selected).
Method 2: Click "
" to set the current frame as the starting frame.
Drag the time frame panel to change the current frame, and then click
"
" again to set the current frame as the ending frame.
Change Wi-Fi Connection Name and Password
1. To change the Wi-Fi connection name:
Connect your camera (with TF card installed) to the computer and
turn on your camera. On the computer, double click "My Computer"
to find and access the removable disk and then open the "
" WiFi.conf file in the folder "MISC." Locate "AP_SSID=AEE
Magicam." Change the content following the equal sign "=" to your
desired name and save it.
2. To change the Wi-Fi connection password:
Connect your camera (with TF card installed) to the computer
and turn on your camera. On the computer, double click the icon
"My Computer" to find and access the removable disk. Then
open the " " WiFi.conf file in the folder "MISC". Find "AP_
PASSWD=AEE12345". Change the content following the equal
sign "=" to your desired password (containing at least 8 digits and
above) and save it.
When the camera and the Wi- Fi based remote control are
synched in operation, hosts will give priority to the operation
command from the camera.
Above images for reference only.