HITEC S60 - Manual (Page 14)

26 27
Start Video Recording Via G-SENSOR Mode
G-Sensor key
Turn the G-Sensor key to "ON" so that the S60 will actively sense the
change of gravity. The system will automatically start video recording
in case of shock or tilting, etc. When this mode is applied in fixed
installation, mounted on a vehicle or helmet for example, it can start
video recording automatically without the need to start recording in
advance. Using this option frees you from manual operation while
conserving battery power.
If the camera does not sense a change in gravity after 3 minutes, it
will exit video recording.
During the camera’s startup process, do not activate the G-sensor
function simultaneously to prevent error.
Video Modes
Basic Operations of Video Recording
1. Turn on the S60 to enter recording standby mode.
2. Aim the lens on the subject and preview it in TFT display.
3. Press the "Video recording" button once to start video recording.
• The system will tick once to indicate the start of video recording.
The TFT display shown below is for video recording:
Working mode
(photo shooting)
Remaining number of
shots of memory card Battery level
Resolution for photo shooting
4. During video recording, press the "Stop" button once to stop video
recording.
• The system generates a tick tone twice to indicate that video
recording stops. The time counter also stops.
• The display will return to recording standby mode.