Startup – HITEC S60 User Manual

Page 12

Insert and Remove The Memory Card

The S60 supports an external TF card up to 64G. Though all SD

cards above Class 10 can be used on the S60, a high-speed card
is recommended for high-definition shooting. When shooting during
dynamic motion, brand SDHC cards are recommended for use.

Insert the memory card
1. Ensure that the S60 is switched off.
2. Insert the SD card flatly into the memory card slot, following the

direction of the arrow. A "click" can be heard to indicate the card
has been fully inserted.

• Remove the memory card
Press down on the center of the exposed

part of the SD card and the card will pop up
slightly. Slide the card out flatly.

Before connecting the host to Wi-Fi or the remote control, please

first insert the SD card.

Startup

Turn the power key to "ON" to turn on the S60:

Power key

When the host is in a power-on state, you can long-press the Shutter
button and Stop button simultaneously for 5s to turn off the host.
After closing the host, you can long-press the Shutter button and
Stop button simultaneously for 5s to turn it on.

• Two red indicators will be lit.
• The S60 enters recording standby mode. Now TFT display is

shown as below:

Visual angle

Battery level

Working mode

(video recording)

Time of video

recording

Resolution of video recording

Remaining video recording

time of memory card