Hanna Instruments HI 2300 - Manual (Page 21)

21
Setup mode allows viewing and modifying the following instrument
parameters.
The parameters are:
• Cell Constant
• TDS Factor
• Temperature Compensation Coefficient
• Reference Temperature
• Current Time (hour & minute)
• Current Date (year, month & day)
• Beep Status
• Instrument Id
• Temperature Unit
To enter SETUP mode press
SETUP while the instrument is in measurement
mode.
Select a parameter with the
ARROW keys.
Press CAL to change a parameter value. The selected parameter will
start blinking.
Press
RANGE to toggle between displayed parameters.
Press the ARROW keys to increase or decrease the displayed value.
Press CFM to save the modified value or CAL to escape without saving.
SETUP