Hanna Instruments HI 2300 - Manual (Page 16)

16
Notes: • If no temperature compensation is selected during calibration,
the temperature coefficient is not displayed in GLP.
• Press GLP at any moment and the instrument will return to
measurement mode.
• If calibration has not been performed on the selected range,
the instrument displays “ no CAL” message blinking.
LOGGING FUNCTION
Up to 500 logged samples can be stored into memory.
LOGGING THE CURRENT DATA
To store the current reading into memory press LOG while the instrument
is in measurement mode.
The instrument will display the current date (mm.dd) on the primary
LCD, the record number on the secondary LCD and “
LOG” tag for a few
seconds (see example below: record No. 11):
followed by the number of free records:
If there are less than 6 memory locations remaining, the record number
and “
Lo” message will be displayed to alert the user.