Hanna Instruments HI 8510 - Manual (Page 28)

55
54£
54
WARRANTY
All Hanna Instruments meters are warranted
for two years against defects in workmanship
and materials when used for their intended
purpose and maintained according to
instructions.
Probes, electrodes and sensors are
warranted for a period of six months.
Damages due to accident, misuse, tampering
or lack of prescribed maintenance are not
covered. This warranty is limited to repair or
replacement free of charge.
If service is required, contact the dealer from
whom you purchased the instrument. If under
warranty, report the model number, date of
purchase, serial number and the nature of the
failure. Obtain a Returned Goods Authorization
from the Customer Service department first
and then return the instrument with the
Authorization # included along with shipment
costs prepaid. If the repair is not covered by
the warranty, you will be notified of the charge
for repair or replacement. When shipping any
instrument, make sure it is properly packaged
for complete protection.
All rights are reserved. Reproduction in whole
or in part is prohibited without the written
consent of the copyright owner.
OTHER ACCESSORIES
HI 98501 ChecktempC thermometer with
penetration probe and 0.1°C
resolution (-50.0 to 150.0°C)
HI 8614 pH transmitter
HI 8614L pH transmitter with display
HI 8615 ORP transmitter
HI 8615L ORP transmitter with display
BL PUMPS Dosing pumps with flow rate from
1.5 to 20 lph
HI 7871 & HI 7873
Level controllers
HI 6050 & HI 6051
Submersible electrode holders
HI 6054 & HI 6057
Electrode holders for in-line
applications
HI 778P Coaxial cable and connectors for
screw-type electrodes
HI 8427 pH/ORP electrode simulator with
1 m (3.3') coaxial cable ending
with female BNC connectors
(HI 7858/1)
HI 931001 pH/ ORP electrode simulator with
display and 1 m (3.3') coaxial
cable ending with female BNC
connectors (HI 7858/1)
HANNA instruments reserves the right to modify
the design, construction and appearance of its
products without advance notice.
Recommendations for Users
Before using these products, make sure that they are entirely suitable for the
environment in which they are used.
Operation of these instruments in residential area could cause unacceptable
interferences to radio and TV equipments, requiring the operator to take all
necessary steps to correct interferences.
The trimmers are sensitive to electrostatic discharges. It is recommended to use
antistatic screwdrivers.
Any variation introduced by the user to the supplied equipment may degrade the
instruments' EMC performance.
To avoid electrical shock, do not use these instruments when voltages at the
measurement surface exceed 24 Vac or 60 Vdc.
To avoid damages or burns, do not perform any measurement in microwave ovens.