Hanna Instruments HI 8510 - Manual (Page 25)

49
48£
48
ACCESSORIES
pH CALIBRATION SOLUTIONS
HI 7004M
pH 4.01 buffer solution, 230 mL
HI 7004L pH 4.01 buffer solution, 500 mL
HI 7006M pH 6.86 buffer solution, 230 mL
HI 7006L pH 6.86 buffer solution, 500 mL
HI 7007M pH 7.01 buffer solution, 230 mL
HI 7007L pH 7.01 buffer solution, 500 mL
HI 7009M pH 9.18 buffer solution, 230 mL
HI 7009L pH 9.18 buffer solution, 500 mL
HI 7010M pH 10.01 buffer solution, 230mL
HI 7010L pH 10.01 buffer solution, 500 mL
ORP SOLUTIONS
HI 7020M
ORP test solution @200/275 mV,
230 mL bottle
HI 7020L ORP test solution @200/275 mV,
500 mL bottle
HI 7091M Pre-treatment reducing solution,
230 mL bottle
HI 7091L Pre-treatment reducing solution,
500 mL bottle
HI 7092M Pre-treatment oxidizing solution,
230 mL bottle
HI 7092L Pre-treatment oxidizing solution,
500 mL bottle
ELECTRODE MAINTENANCE SOLUTIONS
HI 70300M Storage solution, 230 mL bottle
HI 70300L
Storage solution, 500 mL bottle
HI 7061M General cleaning, 230 mL bottle
HI 7061L General cleaning, 500 mL bottle
HI 7073M Protein cleaning solution, 230 mL
HI 7073L Protein cleaning solution, 500 mL
HI 7074M Inorganic cleaning, 230 mL
HI 7074L Inorganic cleaning, 500 mL
HI 7077M Oil & fat cleaning, 230 mL
HI 7077L Oil & fat cleaning,500 mL
HI 7071 3.5M KCl+AgCl electrolyte
solution (4 x 50 mL)
HI 7072 1M KNO
3
electrolyte (4 x 50 mL)
HI 7082 3.5M KCl electrolyte solution (4
x 50 mL)
of regular cable up to 50 m (165'), can be
installed without special connectors.
AmpHel
® electrodes feature a built-in a micro-
amplifier to boost the signal, drastically re-
ducing susceptibility to noise and drift.
The sealed electrode body can stand a mois-
ture up to 100% RH without any effect on the
signal.
LONG DISTANCE INSTALLATIONS, ISOLATED
OUTPUT FOR PC INTERFACE
If the needed installation distance is greater
than 50 m (165'), it is necessary the use of a
transmitter.
HANNA instruments
® offers a full line of pH
and ORP transmitters with or without display.
AmpHel ® is a registered Trademark of "Hanna Instruments"
pH METER
WITH AN AmpHel ELECTRODE
MEASUREMENTS CAN BE
TAKEN FROM DISTANCES UP TO
50 METERS (165 FEET)
WET ENVIRONMENT
RELATIVE HUMIDITY UP TO 100%
MAXIMUM 50 METERS
®
pH-ORP METER
pH METER
WITH A pH TRANSMITTER AND
CONVENTIONAL ELECTRODE
MEASUREMENTS CAN BE
TAKEN FROM DISTANCES UP TO
300 METERS (1000 FEET)
WET ENVIRONMENT
RELATIVE HUMIDITY UP TO 100%
3m MAXIMUM 300 METERS
pH-ORP METER